Toshiba Washer Error Codes

Complete Diagnostic & Troubleshooting Guide

Water System Errors
E1
Water Inlet Issue
  • Ensure water tap is fully open.
  • Check inlet hose for kinks or blockage.
  • Clean inlet filter screen.
  • Test inlet valve operation.
E2
Drain Error
  • Inspect drain hose for blockage.
  • Clean pump filter.
  • Check drain pump operation.
  • Replace pump if faulty.
Door System Errors
E3
Door Lock Failure
  • Ensure door is fully closed.
  • Inspect door latch mechanism.
  • Check wiring to door lock.
  • Replace door lock if defective.
Motor System Errors
E4
Motor Failure
  • Check motor wiring connections.
  • Inspect drum for obstruction.
  • Test motor resistance.
  • Replace motor if necessary.
Safety & Water Level Errors
E5
Water Overflow Detected
  • Check water inlet valve for stuck open condition.
  • Inspect pressure switch operation.
  • Ensure drain system is not blocked.
  • Reset machine after fixing issue.
Sensor Errors
E6
Temperature Sensor Fault
  • Check thermistor wiring.
  • Test sensor resistance.
  • Inspect for corrosion or damage.
  • Replace sensor if faulty.
Heating System Errors
E7
Heating Element Error
  • Test heating element continuity.
  • Check wiring connections.
  • Inspect thermal fuse.
  • Replace heater if defective.
Load Balance Errors
E8
Unbalanced Load Detected
  • Redistribute clothes evenly in drum.
  • Avoid washing single heavy items alone.
  • Pause cycle and rebalance load.
  • Check suspension system if frequent.
Important: Persistent errors may indicate control board or sensor issues requiring technician inspection.